Large scale storage tank consumption radar level gauge

Large scale storage tank consumption radar level gauge

GKYWG-50 radar level gauge, also known as radar level gauge, is an intelligent non-contact level measurement device designed, developed and produced by Hebei Guangke Measurement and Control Equipment Co., Ltd. The transmission power is divided into multiple frequencies such as 26G, 80G, 120G, etc. The sensor emits high-frequency pulses that propagate at the speed of light in the equipment space. When the pulses encounter the surface of the material, they are reflected back and received by the receiver inside the instrument, which converts the distance signal into a level signal to achieve accurate measurement. The GKYWG-50 radar level gauge has a convenient installation method and standard communication interface: 4-20mA/HART, RS485 for communication with PLC and DCS; This product also has two safety forms, explosion-proof and intrinsic safety, and can be widely used for continuous measurement of liquid level, material level, and distance in industries such as petroleum, chemical, food, and water treatment.

GKYWG-50Large scale storage tank consumption radar level gaugeProduct Features

An average thermometer can be optionally selected to achieve multi-point temperature measurement

80G millimeter wave modular design, with a large range and small blind spots

80G small beam wave angle<3 °, loose installation conditions

Suitable for three-layer mixing tanks and process tanks with steam

The intelligent recognition system reads and recognizes the structure of the storage tank, achieving easy obstacle avoidance

Small size, light weight, and convenient non-contact measurement installation

Output signal 4-20mA/HART RS485 MODBUS communication

Design a matching tank side display instrument and multi-point thermometer to achieve multi parameter measurement and display under the tank

High strength penetrability suitable for storage tanks with dust and steam

Low power design, the radar level gauge can be put into normal operation with 8V voltage

Multi protocol customization, can replace imported instruments

Especially suitable for accurate measurement of media such as inert gases and volatile gases in crude oil, heavy oil, and high viscosity chemical products

Technical Specifications

Overall dimensions

Installation diagram

Installation requirements: Generally, standard flanges are used to install on the top of the tank, and various methods such as bypass pipe installation and waveguide pipe installation can also be used. The high-frequency radar should be placed at 1/4 or 1/6 of the diameter of the tank, with a distance of not less than 200mm from the tank wall. The 26G antenna should extend at least 10mm into the tank. For measuring conical tanks, it should be installed in the middle of the conical tank plane to ensure that the top of the cone can be measured; When measuring tanks with stacked materials, universal flanges (adjustable direction) should be selected for flange selection.

Attention: The radar level gauge cannot be installed at the inlet and outlet. Do not install the instrument at the top center of arched or circular tanks to avoid multiple strong wave reflections; Avoid installing in areas with strong eddy currents. If there is stirring or strong chemical reaction, it is recommended to use a waveguide or bypass pipe installation method; When installing the waveguide, it is important to ensure that the inner wall is smooth, and the waveguide with the bottom opening must reach the required bottom liquid level. The guided wave radar level gauge should ensure that the position of the probe line inside the tube is relatively stable, and if necessary, support and straighten the probe line.