Manufacturer of high and low temperature rapid temperature change test chamber

NegotiableUpdate on 07/29

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

1、 High and low temperature rapid temperature change test chamber/rapid temperature rise and fall chamber execution and compliance with standard GB/T10589-1989 Technical conditions for low temperature test chamber GB/T10586-1989 Technical conditions for wet heat test chamber GB/T10592-1989 Technical conditions for high and low temperature test chamber GB2423

Product Details

1High and low temperature rapid temperature change test chamber/rapid temperature rise and fall chamberExecution and compliance with standards

GB/T10589-1989 Technical Conditions for Low Temperature Test Chamber
·GB/T10586-1989 Technical Conditions for Damp Heat Test Chamber
·GB/T10592-1989 Technical conditions for high and low temperature test chambers
·GB2423.1-89 Low temperature test Aa, Ab
·GB2423.1-93 (IEC68-2-3) Constant Damp Heat Test Ca
·MIL-STD810D Method 502.2
·GB/T2423.4-93 (MIL-STD810) Method 507.2 Procedure 3
·GJB 150.9-8 Thermal Test
·GB2423.34-86, MIL-STD883C Method 1004.2 Temperature and Humidity Combined Cycle Test

IIHigh and low temperature rapid temperature change test chamber/rapid temperature rise and fall chamberpurpose

This equipment mainly provides a constant temperature, fast and complex high and low temperature alternating test environment and test conditions for the testing of electronic components, industrial materials, finished product research and development, production, and inspection. It is suitable for various industries such as electronics and electrical appliances, communication, chemical industry, hardware, rubber, toys, and scientific research.

IIIHigh and low temperature rapid temperature change test box/rapid temperature rise and fall box TE seriesModel and Technical Parameters

Model number		JR-80	JR-150	JR -225	JR -408	JR-800	JR -1000
Internal volume (L)		80	150	225	408	800	1000
Inner ruler (cm) (H * W * D)		50x40x40	60x50x50	75x50x60	85x60x80	100x100x80	100x100x100
conditioning		Balanced Temperature and Humidity Control System (BTHC)
work environment		5℃~ 35℃
heater		Nickel chromium alloy electric wire heater
humidifier		Surface evaporation type
blower		centrifugal fan
Airflow mode		Broadband forced airflow circulation (top out and bottom in)
Condensation method		Air cooled or water-cooled
sexually ability	temperature range	B：- 20℃~ 150℃； C：-40℃ ~ 150℃； D：-70℃ ~ 150℃
	Humidity range	20%~98%RH
	temperature fluctuation	±0.5℃
	Humidity fluctuation	±2%RH
	temperature uniformity	±1.5℃
	humidity uniformity	±3%RH
	heating up time	3 ℃/min, the fastest can reach 10 ℃/min
	Cooling time	1 ℃/min, the fastest can reach 5 ℃/min
tie construct reach part piece	Material of inner and outer boxes	Inner box: # 304 mirror stainless steel plate Outer box: # 304 stainless steel or steel plate spray coating
	Insulation material	Hard polyurethane foam glass wool
	controller	Original imported Korean TEMI880 human-machine interface touch screen controller or TEMI300 LCD button controller
	Freezing system	French Taikang fully enclosed compressor/environmentally friendly refrigerant
	Protector	Compressor overheating, overcurrent, overpressure, heating humidification air burning, box temperature rise, water shortage alarm system
	power supply	3 ф 5W380VAC ± 10% or 2 ф 3W220VAC ± 10%
Standard configuration		One observation window (double-layer insulated tempered glass); One ф 50mm test hole (located on the left side); Two sets of sample racks (adjustable height); One fluorescent lamp inside the box; Four mobile work wheels; One humidification water tank; Communication interface; Connect a set of computer operating software.
Optional parts		Recorder, operating hole

Keywords: Environmental stress testing machine, rapid temperature rise and fall test box manufacturer, Shenzhen high and low temperature rapid temperature change test box quotation, rapid temperature change test machine price