Plastic spray paint surface silk screen transfer ink

NegotiableUpdate on 11/02

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Plastic spray paint surface silk screen transfer ink 1. Characteristics: Baolong B76 series ink is a type of solvent based ink suitable for silk screen printing, transfer printing, bright light, and slow drying. It has good printing adaptability, particularly good adhesion to metals, electroplating, UV surfaces, and spray painted surfaces, outstanding solvent resistance, and low drying temperature, which can effectively save energy. 2、 Applicable scope: Suitable for printing metal and electroplating, UV surfaces, spray painted surfaces, and some high demand powder coated surfaces.

Product Details

1. Features:

Baolong B76 series ink is a type of solvent based ink suitable for screen printing, transfer printing, bright light, and slow drying. It has good printing adaptability, particularly good adhesion to metals, electroplating, UV surfaces, and spray painted surfaces, outstanding solvent resistance, and low drying temperature, which can effectively save energy.

2. Applicable scope:

Suitable for printing metal and electroplating, UV surfaces, spray painted surfaces, and some high demand powder coated surfaces.

3. Usage:
① Before printing, dust and oil stains on the surface of the printed material can be removed using anhydrous ethanol (alcohol) or toner (both provided by our company)
② This product is a two-component reactive curing ink. Before printing, it is prepared in a ratio of ink: solid=100:10, stirred well, left to mature for 20 minutes, and then mixed well with an appropriate solvent before printing.
③ The drying of the ink layer after printing may vary depending on the substrate being printed. To ensure post printing quality, please select the drying method and time according to the table below. Choosing a higher temperature can improve adhesion and durability!

Temperature (°C)	80	100	120	150	180
Time（min）	45	30	20	12	8

4. Attention:
① Please try printing before printing to test the compatibility of ink with the printing material to prevent quality problems caused by different material varieties.
② This product is flammable. Before and after use, please seal the ink container completely and store it in a cool and ventilated place to avoid contact with high temperatures and open flames.
③ This product has a certain degree of irritation to the human body. Please take personal protective measures during use to avoid contact with the skin or accidental entry into the eyes. If accidentally splashed into the eyes, please rinse immediately with plenty of water and seek medical attention if necessary.
④ This product has a shelf life of one year from the date of production. Please retest its usability.
5. The technical reference numbers are shown in the following table:

Test Item	Test results	test conditions
Ink fineness	≤12um	Scraper fineness meter
Dry film gloss	≥80°	60Mirror gloss meter
Drying speed	surface dry	25℃×5-10minor60℃×2-3min
Drying speed	action-oriented	25℃48Hror80℃×45min
Alcohol resistance	No change	500Ke Li/cm²Alcohol cotton500Next round trip
Gasoline resistance	No change	500Ke Li/cm²Gasoline cotton500Next round trip
adhesion	100/100	1mm×1mm×100grid 3Madhesive tape
acid resistance	No change	soak5%HCI×24Hr
alkali resistance	No change	soak5%NaOH×24Hr
salt tolerance	No change	soak5%NaCI×24Hr
water resistance	No change	soak20℃ tap water48Hr
heat resistance	No change	80℃×12H
heat resistance	No change	150℃×5H
Instructions	This series of basic colors and four-color dots have heavy metal content that complies with the EU standardsROHSEuropeEN-71Standards and the United StatesASTMStandard.

Warning: This technical information is only for guidance to users and does not guarantee or promise. Please advise users to use according to their actual situation first.