Platinum Rui Sanitary Turbine Flow Meter - Wuxi Platinum Rui

NegotiableUpdate on 11/13

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

1、 Product Overview: The LWGY series sanitary turbine flowmeter is a widely used flow measuring instrument in industries such as pharmaceuticals, food, and beverages, used for metering, ingredient preparation, control, and finished product filling. The instrument housing is made of stainless steel (316L), machine ..

Product Details

1、 Product Overview

The LWGY series sanitary turbine flowmeter is a widely used flow measuring instrument in industries such as pharmaceuticals, food, and beverages, used for measuring, ingredient preparation, control, and finished product filling. The instrument housing is made of stainless steel (316L), and the movement part is made of special materials, which have good anti-corrosion and rust prevention capabilities. The entire structure breaks through traditional craftsmanship and adopts good anti-corrosion ability. Greatly improved the accuracy and repeatability of the instrument. Specially designed for the pharmaceutical and beverage industries, using a quick connect structure for easy cleaning as shown in Figure 1.

Figure 1

2、 Product Features

1. Sensing hard alloy bearing thrust type not only ensures accuracy, but also improves wear resistance.

2. Simple structure, sturdy and easy to disassemble.

3. Adopting a quick installation structure for easy cleaning

4. Wide measurement range, low lower limit flow rate.

5. Low pressure loss, good repeatability, and an accuracy of up to 0.5%.

6. Has good resistance to electromagnetic interference and vibration.

3、 Technical performance: Table 1

Instrument caliber and connection method	4. 6, 10, 15, 20, 25, 32, 40 are connected by threads
Instrument caliber and connection method	(15, 20, 25, 32, 40) 50, 65, 80, 100, 125, 150, 200 are connected by flanges
accuracy class	±0.5%R
turndown ratio	1:10； 1:15； 1:20
Instrument material	304 stainless steel, 316 (L) stainless steel, etc
Temperature of the tested medium (℃)	-20～＋120℃
environmental conditions	Temperature -10~+55 ℃, relative humidity 5%~90%, atmospheric pressure 86~106Kpa
output signal	4-20mADC current signal (LWGY - □ C type)
power supply	LWGY - □ B type: Comes with lithium battery power supply (can be used continuously for 3 years); LWGY - □ C type:+24VDC
Signal transmission line	2 × 0.3 (two-wire system)
transmission distance	≤1000m
Signal line interface	Internal thread M20 × 1.5 (LWGY - □ C type)
Explosion-proof rating	ExdIIBT6
Protection level	IP65

4、 Measurement range and working pressure: Table 2

Instrument diameter (mm)	Normal flow range (m3/h)	Expand flow range (m3/h)	Conventional withstand pressure (MPa)	Specially designed pressure resistance level (MPa) (flange connection method)
DN 4	0.04～0.25	0.04～0.4	6.3	12. 16, 25
DN 6	0.1～0.6	0.06～0.6	6.3	12. 16, 25
DN 10	0.2～1.2	0.15～1.5	6.3	12. 16, 25
DN 15	0.6～6	0.4～8	6.3, 2.5 (flange)	4.0, 6.3, 12, 16, 25
DN 20	0.8～8	0.45～9	6.3, 2.5 (flange)	4.0, 6.3, 12, 16, 25
DN 25	1~10	0.5～10	6.3, 2.5 (flange)	4.0, 6.3, 12, 16, 25
DN 32	1.5～15	0.8～15	6.3, 2.5 (flange)	4.0, 6.3, 12, 16, 25
DN 40	2~20	1~20	6.3, 2.5 (flange)	4.0, 6.3, 12, 16, 25
DN 50	4~40	2~40	2.5	4.0, 6.3, 12, 16, 25
DN 65	7~70	4~70	2.5	4.0, 6.3, 12, 16, 25
DN 80	10~100	5~100	2.5	4.0, 6.3, 12, 16, 25
DN 100	20~200	10~200	2.5	4.0, 6.3, 12, 16, 25
DN 125	25~250	13~250	1.6	2.5, 4.0
DN 150	30~300	15~300	1.6	2.5, 4.0
DN 200	80~800	40~800	1.6	2.5, 4.0

5、 Nominal diameter: Table 3

model	Nominal diameter (mm)	L(mm)	H(mm)	G	Lˊ(mm)	D(mm)	d(mm)	number of holes
LWGY-4	4	275	145	G1/2	215
LWGY-6	6	275	145	G1/2	215
LWGY-10	10	455	165	G1/2	350
LWGY-15	15	75	173	G1		F65	F14	4
LWGY-25 LWGY-32	25 32	100 140	180	G5/4 G2		F85 F100	F14	4
LWGY-40	40	140	178	G2		F14		4
LWGY-50	50	150	252			F125	F18	4
LWGY-80	80	200	287			F160	F18	8
LWGY-100	100	220	322			F180	F18	8
LWGY-150	150	300	367			F250	F25	8
LWGY-200	200	360	415			F295	F23	12

6、 Product selection table: Table 4

Model number								Explanation
RL-LWGY ─	□	/□	/□	/□	/□	/□	/□	Explanation
Nominal diameter	4							4mm， The standard range is 0.04-0.25m3/h, and the wide range is 0.04-0.4m3/h
	6							6mm， The standard range is 0.1-0.6m3/h, and the width measuring wheel is 0.06-0.6m3/h
	10							10mm， The standard range is 0.2-1.2m3/h, and the wide range is 0.15-1.5m3/h
	15							15mm， The standard range is 0.6-6m3/h, and the wide range is 0.4-8m3/h
	20							20mm， The standard range is 0.8-8m3/h, and the wide range is 0.4-8m3/h
	25							25mm， The standard range is 1-10m3/h, and the wide range is 0.5-10m3/h
	32							32mm， The standard range is 1.5-15m3/h, and the wide range is 0.8-15m3/h
	40							40mm， The standard range is 2-20m3/h, and the wide range is 1-20m3/h
	50							50mm， The standard range is 4-40m3/h, and the wide range is 2-40m3/h
	65							65mm， The standard range is 7-70m3/h, and the wide range is 4-70m3/h
	80							80mm， The standard range is 10-100m3/h, and the wide range is 5-100m3/h
	100							100mm， The standard range is 20-200m3/h, and the wide range is 10-200m3/h
	125							125mm， The standard range is 25-250m3/h, and the wide range is 13-250m3/h
	150							150mm， The standard range is 30-300m3/h, and the wide range is 15-300m3/h
	200							200mm， The standard range is 80-800m3/h, and the wide range is 40-800m3/h
type		B						Battery powered on-site display type
		C						On site display: 4-20mA two-wire current output
		C1						On site display/RS485 communication protocol
		C2						On site display/ART communication protocol
accuracy class			05					Accuracy level 0.5
accuracy class			10					Accuracy class 1.0
Turbine type				W				Wide range turbine
Turbine type				S				Standard turbine
material					S			304 stainless steel
material					L			316 (L) stainless steel
explosion-proof						E		Explosion proof type (explosion-proof grade: Exd Ⅱ BT6)
pressure rating							N	Conventional (refer to Table 2)
pressure rating							H(x)	High voltage (refer to Table 2)

7、 Proper use of sanitary flow meters

1. When using, the tested liquid should be kept clean and free of impurities such as fibers and particles.

2. At the beginning of use, the sensor should be slowly filled with liquid before opening the outlet valve,It is strictly prohibited for the sensor to be impacted by high-speed fluid when it is in a liquid free state.

3. The maintenance cycle of sensors is generally six months. During maintenance and cleaning, please be careful not to damage the parts inside the measuring chamber, especially the impeller. Please pay attention to the position relationship between the guide components and the impeller during assembly.

4. When the sensor is not in use, the internal liquid should be cleaned and protective covers should be added at both ends of the sensor to prevent dust and dirt from entering, and then stored in a dry place.

5. The filter used should be cleaned regularly. When not in use, the liquid inside should be cleaned. Like the sensor, it should be added with a dust boot and stored in a dry place.

6. The transmission cable of the sensor can be laid overhead or buried underground (iron pipes should be covered when buried underground)

7. Before installing the sensor, connect the wires to the display instrument or oscilloscope, turn on the power, blow or manually turn the impeller to quickly rotate and observe if there is any display. When there is a display, install the sensor. If there is no display, check the relevant parts and eliminate the fault.

8、 Price of sanitary turbine flowmeter
The price of a product is often related to its diameter and installation method,The clamp connection method for sanitary turbine flow meters is widely used, so the price should be higher. The final price should be based on the on-site working conditions. Platinum Rui will provide you with the most favorable price and quality service!