Platinum Rui Target Flow Meter - Wuxi Platinum Rui Measurement and Control

1、 Product Overview

The BSL target flowmeter was first applied in industrial flow measurement in the 1960s, mainly used to solve the flow measurement of high viscosity and low Reynolds number fluids. It has gone through two major development stages: pneumatic meters and electric meters. The target flowmeter is a new type of flow measurement instrument developed based on the original strain gauge measurement principle, using a new type of capacitive force sensor as the measuring and sensitive transmission element, and utilizing modern digital intelligent processing technology. The use of capacitive force sensors is the key to achieving high precision and stability in this new product, completely changing the various defects of strain gauge target flow meters such as large temperature drift, poor overload (impact) resistance, and static sealing points. It not only leverages the original technical advantages of target flow meters, but also has measurement accuracy comparable to volumetric flow meters. In addition to its unique anti-interference and anti impurity performance, it can replace the flow measurement problems that can be measured by conventional flow meters, especially in difficult flow measurement conditions such as small flow, high viscosity, easy coagulation and blockage, high temperature, low temperature, strong corrosion, and strong vibration, and has good adaptability. At present, it has been widely used for flow measurement in various fields such as metallurgy, petroleum, chemical industry, energy, food, and environmental protection.

2、 Product Features

1. The entire instrument structure is sturdy without moving parts, with an insertable structure that is easy to disassemble;

2. Multiple anti-corrosion and high/low temperature resistant materials can be selected (such as Hastelloy, titanium, etc.);

3. The whole machine can be made fully sealed without dead corners (welded form), without any leakage points, and can withstand high pressure of 42MPa;

4. The instrument is equipped with a self checking program, and the fault symptoms are clear at a glance;

5. The sensor does not come into contact with the measured medium, there is no wear on the components, and it is safe and reliable to use;

6. Dry calibration method can be used on-site, namely the weight hanging method. Single key operation can complete calibration;

7. There are multiple installation methods to choose from, such as online plug-in, which has low installation costs;

8. Equipped with integrated temperature and pressure compensation, directly output quality or standard square;

9. It has optional small signal removal, non-linear correction, and selectable filtering time;

10. Capable of accurately measuring gas and liquid flow rates under various working conditions of room temperature, high temperature of 500 degrees, and low temperature of -200 degrees;

11. Accurate measurement, with an accuracy of up to 0.2%;

12. Good repeatability, generally ranging from 0.05% to 0.08%, and fast measurement;

13. The pressure loss is small, only about 1/2 △ P of the standard orifice plate;

14. Strong anti-interference and anti impurity ability;

15. The range can be changed by replacing the blocking element (target) according to actual needs;

16. Low power battery on-site display, capable of online direct reading of readings, and the display screen can simultaneously read instantaneous and cumulative flow rates as well as percentage bar charts;

17. Easy to install and maintain;

18. Multiple output forms, capable of transmitting various parameters remotely;

19. Strong shock resistance, capable of measuring pulsating flow within a certain range.