Portable fully automatic insulation oil helium ion detector

LX-3100FAPortable fully automatic insulation oil helium ion detectorUsing the principle of helium ionization gas chromatography, the detection of 9 components including H2, CO, CO2, CH4, C2H6, C2H4, C2H2, C3H6, C3H8, etc. for insulation dissolution is directly carried out by entering oil. The low detection concentration is as low as 0.005 µ L/L, providing more comprehensive and accurate experimental data for insulation oil fault diagnosis of ultra-high voltage level transformers, ensuring safe and economic operation of the power grid, and significant social benefits.

Technical features:

1. Headspace degassing system

The instrument adopts fast headspace degassing technology, which directly enters the oil for fully automatic and rapid analysis, without the cumbersome operation steps of oscillation degassing, avoiding analysis errors caused by human factors.

2. Ultra high sensitivity pulse discharge helium ionization detector

The pulse discharge helium ionization detector (PDHID) equipped on the instrument is a highly sensitive universal detector with high linear response to almost all inorganic and organic compounds, with a detection limit as low as 0.005 µ L/L.

3. Highly integrated and modular structural design

The instrument adopts a highly integrated and modular structure design, with carrier gas, standard gas, computer, physical keyboard, touch screen, etc. all concentrated in one chassis, and a built-in 12 inch touch screen for easy operation. The outer box adopts a storm box with a drop resistance height of 1.2 meters, and the modular structure design is simple and easy to maintain.

4. Logarithmic amplification technique:

Adopting advanced digital logarithmic amplification signal acquisition mode, the amplification factor is increased when the content is low, and reduced when the content is high. After signal amplification, the inverse number operation is performed to restore linearity.

5. Center cutting back blowing technology

The instrument is equipped with a multi valve center cutting blowback system, which blows back C3+components to avoid interference from heavy components on hydrocarbon gases.

6. Zero hidden dangers in safety testing

LX-3100FAPortable fully automatic insulation oil helium ion detectorUsing helium as the carrier gas, hydrogen gas is not used during the detection process, and ignition operation is not required, resulting in zero safety hazards during safety testing.

Technical parameters: