QBY-50/QBY-K50 plastic diaphragm pump

NegotiableUpdate on 01/08

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

QBY-50/QBY-K50 plastic diaphragm pump

Product Details

QBY-50 Physical shooting image

QBY-K50 Plastic diaphragm pump

Product Overview:
The QBY pneumatic diaphragm pump can pump and absorb various corrosive liquids, such as those with particles, high viscosity, volatile, flammable, explosive, highly toxic liquids, ceramic glaze slurry, fruit slurry, glue, oil tanker warehouse oil recovery, temporary tank dumping, etc. The material of the flow passage components of the pump body is stainless steel, aluminum alloy, cast iron, and engineering plastic. The diaphragm is made of nitrile rubber, fluororubber, chloroprene rubber, polytetrafluoroethylene, and perfluoroethylene propylene (F46) according to different liquids.

The QBY-50 series pneumatic diaphragm pump uses compressed air, steam, and industrial waste gas as power sources, with a suction stroke of 7m, a head of 0-50m, and a flow rate of 0-12m³/H is infinitely adjustable.
Note: Metal pumps are recommended for organic solvents.

performance parameter

model	internet traffic (m³/h)	lift (m)	KPa (kgf/cm²⁾	Suction distance (m)	Allow to (mm)	Gas supply pressure (kbf/cm²⁾	Gas supply consumption (m³/min)	material
model	internet traffic (m³/h)	lift (m)	KPa (kgf/cm²⁾	Suction distance (m)	Allow to (mm)	Gas supply pressure (kbf/cm²⁾	Gas supply consumption (m³/min)	aluminum alloy	stainless steel	Casting iron	Enhanced polypropylene
QBY-10	0～0.8	0~50	6	5	1	7	0.3	★	★	★	★
QBY-15	0~1	0~50	6	5	1	7	0.3	★	★	★	★
QBY-25	0～2.4	0~50	6	7	2.5	7	0.6	★	★	★	★
QBY-40	0~8	0~50	6	7	4.5	7	0.6	★	★	★	★
QBY-50	0~12	0~50	6	7	8	7	0.9	★	★	★	★
QBY-65	0~16	0~50	6	7	8	7	0.9	★	★	★	/
QBY-80	0~24	0~50	6	7	10	7	1.5	★	★	★	/
QBY-100	0~30	0~50	6	7	10	7	1.5	★	★	★	/

Note: ★ Yes/No