Radar testing high and low temperature humidity alternating test chamber

NegotiableUpdate on 01/17

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Radar Testing High and Low Temperature Damp Heat Alternating Test Chamber Product Name: Radar Testing High and Low Temperature Damp Heat Alternating Test Chamber Product Model: WSHW-786CF Product Introduction: Radar Testing High and Low Temperature Damp Heat Alternating Test Chamber is mainly used as equipment for testing the performance of materials in various environments and testing the heat resistance, cold resistance, dry resistance, and moisture resistance of various materials

Product Details

Radar testing high and low temperature humidity alternating test chamber

Product Name:Radar testing high and low temperature humidity alternating test chamber

Product model:WSHW-786CF

Product Introduction:

The radar testing high and low temperature damp heat alternating test chamber is mainly used as equipment to test the performance of materials in various environments and to test the heat resistance, cold resistance, dry resistance, and moisture resistance of various materials. Suitable for quality testing of electronic, electrical, communication, instrument, vehicle, plastic products, metal, food, chemical, building materials, medical, aerospace and other products.

Applicable standards:GB/T5170.5-2008、GB/T10586-2006、GB/T2423.1-2008testA、GB/T2423.2-2008testB、GB/T2423.3-2006Experiments, etc

Control method: AdoptingBalanced temperature and humidity control system(BTHC)The sensing system transmits the actual data inside the test chamber to the controller, which controls it throughSSRMulti stage intelligent output, balanced temperature and humidity system output power, ensuring sufficient stability of temperature and humidity inside the test chamber, and with energy-saving function, minimizing instrument power consumption and ensuring long-term stable operation of the instrument.

Technical parameters:

warm linear measure Fan enclose	-45℃~ +95℃
wet linear measure Fan enclose	20% RH~98% RH (control range as shown in the temperature and humidity standard area control range diagram on the previous page)
control make steady calm linear measure	temperature ±0.5℃ humidity ±1-2%RH
divide cloth equal even linear measure	temperature ≤2℃ humidity ＋2/-3% RH
rise warm fast rate	≥3℃/min（-40℃~ +85℃）
fall warm fast rate	≥1.0℃/min(-40℃~ +85℃)
Special testing conditions	Reserved diameter on the right side of the instrument900mmOpenings, equipped with sealed soft silicone around (resistant to high and low temperatures)installMillimeter wave transparent sphere
warm linear measure the utmost point limit	maximum temperature +95℃ minimum temperature -45℃
inside dimensions	wideX Depth x Height:650×1100×1100（mm）
Inner box material	Epoxy resin board
External material	Epoxy resin board+Special baking paint treatment for steel plates
Insulation material	Using German Bayer polyurethane rigid foam+High density glass fiber Has excellent temperature resistance and insulation effect
Protector	Zero crossing gate fluid power controller Heating air burn protection switch Compressor overpressure protection switch Compressor overload overcurrent protection switch Phase loss protection switch Non fuse overload protector Heating fast insurance Water shortage alarm protection
Electricity requirements	send use electricity press ：AC3￠5W 380V 50/60HZ. Voltage fluctuation allowable value:±10%. maximum power： 13kw

WEISSTECH website:

http://www.weisstech.com.cn

http://www.weiss.tech/

http://www.weiss.cx/

http://www.weiss17.com

http://www.qe-test.com