SMART-2097+Intelligent Multi Frequency Eddy Current Flaw Detector Specification

NegotiableUpdate on 10/19

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Brief description: The specifications of the intelligent multi frequency eddy current flaw detector can be pre-set with parameters and expert programs according to user needs, with easy operation, human-machine dialogue, screen menu prompts, and online hotkey assistance.

Product Details

The SMART-2097+intelligent multi frequency eddy current flaw detector is unique in that it adopts advanced DSP parallel digital processing technology, real-time multi frequency eddy current detection technology, and microprocessor technology, which can effectively detect defects in metal material components in real time, distinguish alloy types and heat treatment states, as well as thickness changes. SMART-2097+can preset parameters and expert programs according to user needs, with easy operation, human-machine dialogue, screen menu prompts, and online hotkey assistance.

Specification Description of Intelligent Multi frequency Eddy Current Flaw Detectorfunctional information

·Two independent detection frequencies
·Fast and high-precision/digital electronic balancing
·Automatic amplitude and phase measurement
·Non equal amplitude phase/amplitude alarm
·The excitation amplitude of the probe can be adjusted by pressing the button
·Dual impedance plane graph and one baseline display
·High brightness, wide viewing angle EL electroluminescent screen
·Built in rechargeable lithium battery
·Can work continuously for more than 8 hours
·Data transmission adopts USB or Ethernet communication
·Expandable crack depth measurement function
·Selection between Cartesian and Polar Coordinate Systems
·Easy to operate, with both Chinese and English operating interfaces

Technical Specifications:

Size and weight:
Size: 260 * 185 * 110mm Weight: 2.5kg
Power supply: external adapter (DC 18V), built-in lithium battery (14.8V 6.3AH)

Work environment:
Working temperature: -20 ℃~+55 ℃
Storage temperature: -20 ℃~+50 ℃
Relative humidity: not exceeding 85%

Eddy current testing:
1. Channel: 1
2. Frequency: 2
3. Frequency range: 64 Hz to 5 MHz
4. Gain: 0-90dB, small step length 0.5dB
5. Phase rotation: 0-359 °, step 1 °
6. Gain ratio (Y/X): 0.1-10
7. Amplitude/phase measurement: automatic/manual
8. Display mode: dots/lines/blanking
9. High pass filtering: 0-500Hz
10. Low pass filtering: 10-10000Hz
11. Number of digital filter points: 1-100
12. Probe excitation signal amplitude: 1-8 levels
13. Number of alarm boxes: 8
14. Data storage: 100 sets
15. Parameter storage: 100 sets
16. Display screen: 5.7-inch, 320 * 240 high-resolution EL LCD screen
17. Microprocessor: 32-bit
18. Memory: 1G
19. Memory capacity: 64M

Specification Description of Intelligent Multi frequency Eddy Current Flaw DetectorApplication fields:

·Used for general defect assessment (surface inspection of aircraft components such as blades, hubs, landing gear, etc.)
·Cracks on the inner surface of rivet holes or bolt holes can be detected without disassembling or removing fasteners
·Surface crack detection of various metal components and welds
·Detect changes in thickness of thin plates (wear, rust, mechanical wear, etc.)
·Measurement of thickness of non-conductive coatings or plating on conductors
·Detect various non ferromagnetic heat exchanger tubes such as copper, titanium, aluminum, zirconium, etc. in service (including cracks, wall thickness, corrosion, etc.)
·Detecting interlayer gap corrosion in composite materials, such as testing multi-layer structures, aluminum skins, and fuselage wing joints of aircraft
·Monitor changes in heat treatment status and material sorting
·This instrument has added the functions of weld seam detection and crack depth measurement with anti-corrosion coating, as well as conductivity testing (optional), making it particularly suitable for in-service and pre service testing in fields such as aviation, aerospace, power, petrochemicals, and mechanical manufacturing