SP-30A online acid-base concentration electrode

Key Features:

SP-30 industrial concentration electrode can be installed in multiple ways, recommended for flow installation

Suitable for measuring acid-base and salt concentrations within 30%

The import and export are connected by hoses with diameters ranging from 8mm to 10mm

Polysulfone material electrode and flow cell, resistant to strong corrosive liquids such as strong acids and alkalis

Model: SP-30A
Material: polysulfone, platinum;
Electrode constant: 30 ± 5cm-1;
Applicable temperature: 0-100 ℃
Measurement range: 0-30% (depending on the instrument)
Voltage resistance: 1.0MP;
Connection method: Insert the connector directly and connect it one by one according to the markings on the electrode and the instrument.

Standard configuration: SP-30A concentration electrode with flow cell, electrode with 10 meter dedicated cable.

1. The electrode is installed in a flow-through manner, suitable for water circuits connected by soft and hard pipes. The outer diameter of the inlet pipe is 12, and the outer diameter of the outlet pipe is 10, which can also be customized according to the user's needs.
2. The electrode is installed in a submerged manner, and the electrode model is SP-30C. The lead of the electrode is threaded out of the protective sleeve, and the 3/4 external thread on the top of the electrode is connected to the 3/4 internal thread of the protective sleeve with a raw tape tube. Ensure that the top of the electrode and the electrode wires are not flooded with water.
3. Electrode pipeline installation, model SP-30B. Connect the external thread M32 x1.5 at the front end of the electrode to the pipeline.