SUVTP40KHS

output

• Output power capacity

  32.0 K wattage/40.0 kVA

• Maximum configurable power (watts)

  32.0 K wattage/40.0 kVA

• Rated output voltage

  400V 3PH

• Output voltage annotation

  Can be configured for 3-phase rated output voltage of 380, 400, or 415 V

• Full load efficiency

  96.0 %

• Output voltage distortion

  Less than 5% at full load

• Output frequency (synchronized with the main frequency)

  47-53 Hz (50 Hz nominal value)

• Output frequency (asynchronous)

  50Hz +/- 0.1%， Rated 50Hz

• Other output voltages

  380, 415

• Peak load factor

  03:01

• topology

  Dual conversion online

• Waveform type

  sine wave

• Maximum output current

  64

• Output connection
  (1) Hard Wire 5-wire (3PH+N+G) (backup battery)

  (1) Screw Terminals (backup battery)

  (1) Hard Wire 4-wire (3PH+G) (spare battery)
• bypass

  Built in maintenance bypass, built-in static bypass

input

• Rated input voltage

  400V 3PH

• input frequency

  47-70 Hz (automatic adaptation)

• Input terminal type

  Hard Wire 5-wire (3PH + N + G)

• Working voltage range

  304 – 477 V

• Full load efficiency

  96.0 %

• Other input voltages

  380, 415

• Maximum input current

  55.0 A

• Input power factor under full load

  0.98

Battery and running time

• Battery Type

  No internal battery - use external battery system

• Typical charging time

  5 hours

• Automatically detectable and scalable delay time

  1

• Optional battery

  APC-Smart-UPS-VT-40kVA-400V-5x8-

Communication and Management

• Interface ports (multiple)

  DB-9 RS-232 , Smart-Slot

• Control panel

  Multi functional LCD display status management console.

• Sound alarm

  Audible and visible alarms prioritized by severity

• Emergency shutdown

  Yes

physical parameters

• tall

  823 , 82.3 cm

• wide

  523 , 52.3 cm

• deep

  813 , 81.3 cm

• Net weight

  182.5 kg

• gross weight

  221.5 kg

• Shipping height

  1290 , 129.0 cm

• Shipping width

  720 , 72.0 cm

• Shipping depth

  1110 , 111.0 cm

• color

  Black

• Quantity of products on each transport pallet

  1.0

environment

• Operating Temperature

  0 - 40 °C

• Relative humidity at work

  0 - 95 %

• operating height

  0-99.9 meters

• Storage temperature

  -50 - 40 °C

• Store relative humidity

  0 - 95 %

• Storage height

  0-15000 meters

• Noise that can be heard 1 meter away from the surface of the device

  55.0 dBA

• Online heat dissipation

  5459.0 BTU/hr

• protection level

  IP 20

Consistency

• Management organization certification

  C-tick, CE, EN 50091-2, EN/IEC 62040-3, IEC 61000-3-2, IEC 61000-3-3,

• ISO 14001, ISO 9001, VFI-SS-111

• Standard Warranty

  1-year repair or replacement service, start service

• Characteristics of SUVTP40KHS

  APC's Smart UPS VT, 40kVA, 400V, with 5x8 startup service, internal maintenance bypass, and parallel capability

• Having parallel capability
  By simultaneously using multiple uninterruptible power supplies, the total power capacity can be increased.
• Capable of parallel redundancy
  Supply power to connected devices through multiple uninterruptible power supplies to improve system redundancy

Smart UPS VT features and advantages

Marketing Features

• Input power factor correction
  By using a small generator and connecting wires, the installation cost is minimized
• network management
  Realize remote power management for UPS through the network.
• Manual maintenance of bypass
  No need to install external mechanical bypass, which can reduce installation costs.
• Dual power input
  Connecting the UPS to two independent power sources increases reliability.
• Scalable runtime
  Allow for quick increase of more running time when needed
• Hot swappable battery
  Ensure a clean and uninterrupted power supply throughout the battery replacement process to protect the equipment

System Protection

• Cold start capability
  Provide temporary battery power supply when the mains power stops
• Certified by security agencies
  The product has been tested and certified to ensure safe operation with the connected service provider equipment within the specified environment.
• Frequency and voltage adjustment
  Poor frequency and voltage conditions can be corrected without using batteries, providing higher availability.

Total cost of ownership

• Intelligent battery management
  Obtain optimal battery performance, lifespan, and reliability through intelligent and precise charging technology.
• Manual maintenance of bypass
  No need to install external mechanical bypass, which can reduce installation costs.
• Temperature compensation battery charging
  Adjust the charging voltage according to the actual battery temperature to extend the battery life
• Input power factor correction
  By using a small generator and connecting wires, the installation cost is minimized

Ease of management

• Compatible with Yingfei Manager
  In order to achieve centralized management through APC's Yingfei Manager software.
• network management
  Realize remote power management for UPS through the network.
• Sound alarm
  Provide notification of changes to the conditions of the mains and UPS power supply
• LSD monitor
  Alphanumeric display, displaying system parameters and alarms.
• LED status indicator light
  With the help of video indicators, device and power status can be quickly understood.
• Programmable frequency range
  Ensure compatibility with different input frequencies
• SmartSlot Slot Slot
  Customize UPS performance using management cards

Serviceability

• Automatic self check
  Regularly self check the battery to ensure early detection of batteries that need to be replaced.
• No need to replace the battery with tools
  Can quickly and conveniently replace batteries
• modular design
  Through self diagnosis, on-site replaceable modules provide fast availability and reduce maintenance requirements
• The module has been installed and can be shipped
  Capable of segmented transportation and testing of UPS before installation, as well as rapid installation

usability

• Parallel battery module
  Provide higher availability through redundant batteries
• Automatic internal bypass
  Provide common power to the connected load in the event of overload or malfunction of the UPS power supply.
• Compatible with generators
  When using the generator power supply, ensure a clean and uninterrupted power supply to protect the equipment
• Hot swappable battery
  Ensure a clean and uninterrupted power supply throughout the battery replacement process to protect the equipment
• Scalable runtime
  Allow for quick increase of more running time when needed
• Dual power input
  Connecting the UPS to two independent power sources increases reliability.