Single flange liquid level transmitter

NegotiableUpdate on 01/04

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Single flange level gauge, also known as single flange level transmitter. The $n $n liquid level transmitter is a field transmitter directly installed on pipelines or containers. Due to the direct contact between the isolation membrane and the liquid medium, there is no need to use a pressure tube to lead out the positive pressure side. Therefore, it can measure the liquid level, pressure, and density of media such as high temperature, high viscosity, easy crystallization, easy precipitation, and strong corrosion, and then convert them into 4-20mA.DC signal output

Product Details

GSH-G1H3581 type:

Single flange level transmitters can accurately measure the liquid level and density of various containers, with two types: flat flange and plug-in flange, suitable for measuring high viscosity media or suspended liquids.

The installation flange standard of GSH-G1H3581 T-shaped single flange liquid level transmitter is in accordance with ANSI. The flange has 3 'and 4' specifications, and the flange grades are 150LB (2.5MPa) and 300LB (5.0MPa). The flange installation dimensions are shown in the following chart.

If the user adopts the GB9116-88 standard, please specify DN=80, 100, PN=2MPa. Due to the thin isolation membrane, it is a weak link in corrosion resistance. Therefore, the materials for the liquid film sheet include 316L, Hastelloy C-276, Monel, tantalum, etc., which can be suitable for different anti-corrosion requirements. The corrosion resistance reference table in the appendix can be selected reasonably according to the parameters such as the concentration, humidity, and pressure of the measured medium.

For situations with strong corrosiveness, anti-corrosion structure transmitters can be selected. If not specified by the user, the flange and liquid receiving membrane material 316L with a capacity of 3'150LB shall be supplied. The installation flange standard of TN3851LT single flange liquid level transmitter is in accordance with ANSI. The flange has 3 "and 4" specifications, and the flange grade is divided into 150LB (2.5MPa) and 300LB (5.0MPa). The flange installation dimensions are shown in the following chart. If the user adopts the GB9116-88 standard, please specify DN=80, 100, PN=2MPa. The materials for the liquid receiving membrane include 316L, Hastelloy C-276, Monel, tantalum, etc.

Key Features:

Simple structure: There are no movable or elastic components, so it has good reliability and minimal maintenance.

Easy installation: The built-in structure particularly demonstrates this feature, without the need for any specialized tools.

Easy adjustment: The zero position and range potentiometers can be used to freely shift the zero position or change the range within the effective range of liquid level detection, and the two adjustments do not affect each other.

Widely used: Suitable for liquid level measurement in media with high temperature, high pressure, strong corrosion, etc.