Small Cold and Hot Shock Test Chamber (Two Box Type)

NegotiableUpdate on 01/17

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Small Cold and Hot Shock Test Chamber (Two Box Type) Product Name: Small Cold and Hot Shock Test Chamber (Two Box Type) Product Model: WSLRS-036B/3 Product Introduction: Product Usage: The Cold and Hot Shock Test Chamber is mainly used in industries such as electronic and electrical components, automation components, communication components, automotive parts, metals, chemical materials, plastics, etc

Product Details

Small Cold and Hot Shock Test Chamber (Two Box Type)

Product Name:small-scalethermal shock chamber(Two box type)

Product model:WSLRS-036B/3

Product Introduction:

Product Application: The cold and hot shock test chamber is mainly used in industries such as electronic and electrical components, automation parts, communication components, automotive parts, metals, chemical materials, plastics, etc., as well as in the defense industry, aerospace, and military industryBGA、PCBBase plate, electronic chipICPhysical changes of semiconductor ceramic magnets and polymer materials,Test the material's ability to withstand continuous environments of extreme high and low temperatures in an instant, in order to test the chemical changes or physical damage caused by thermal expansion and contraction in the shortest possible time.

Control method: Using low-temperature and high-temperature thermal storage tanks, move the test basket up and down according to the action, and send the test basket to the high-temperature and low-temperature zones,Thus achieving a rapid temperature shock effect,Balanced temperature control system（BTC）+Specially designed air supply circulation system,useP.I.D.mode controlSSR,Make the heating amount of the system equal to the heat loss amount,Can be used stably for a long time.

Basic parameters
shock temperature	-40℃～+150℃
Temperature range in high temperature zone	＋50℃ — ＋170℃
Temperature range in low temperature zone	-60℃ —-10℃
Heating time in high temperature zone	room temperature→ ＋170Approximately required at ℃50min(Room temperature at+)10--＋30At ℃)
Cooling time in low-temperature zone	room temperature→ -60Approximately required at ℃85min(Room temperature at+)10--＋30At ℃)
temperature fluctuation	±1.0℃
temperature uniformity	±2.0℃
Temperature shock conversion time	8Seconds (high temperature low temperature)
Temperature recovery stabilization time	5minute
Temperature holding time	During the experiment, the temperature shock constant temperature time is30minthe above
Basket size	wideX Depth x Height:400×300×300（mm）
Outer box size (approximately)	wideX Depth x Height:1050×1520×1750（mm）
Inner box material	Foggy stainless steel plate（SUS#304）
External material	Cold rolled steel plate baked paint

WEISSTECH website:

http://www.weisstech.com.cn

http://www.weiss.tech/

http://www.weiss.cx/

http://www.weiss17.com

http://www.qe-test.com