Stainless steel smoke exhaust duct

NegotiableUpdate on 10/29

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

1、 Introduction to Stainless Steel Smoke Exhaust Ducts: One of the reasons why stainless steel smoke exhaust ducts are widely used is their excellent fire resistance performance

Product Details

1、 Introduction to Stainless Steel Smoke Exhaust Ducts

Good fire resistance is one of the reasons why stainless steel smoke exhaust ducts are widely used. Galvanized air ducts are easy to install, convenient to manufacture on site, and closely coordinated with civil engineering, making them suitable for very complex purification and ventilation projects. The product is mainly used for fire exhaust, air conditioning ventilation, dust ventilation, etc. in large shopping malls, office buildings, subway stations, large supermarkets, and modern factories.

2、 Advantages of stainless steel smoke exhaust duct

1. Lightweight: Its weight is much lighter than traditional air ducts, which is beneficial for stainless steelSmoke exhaust ductThe transportation also has a relatively small load on the building.

2. Easy installation: stainless steelSmoke exhaust ductThe installation is very simple and fast, even in small spaces such as high-rise buildings.

3. Good appearance: The appearance is bright and flat, in line with the current architectural design style. It will be a beautiful sculpture in the city with supporting buildings.

4. Good performance: Stainless steel exhaust ducts have good air tightness, corrosion resistance, heat resistance, insulation, and low resistance. This type of air duct is environmentally friendly, safe, and reliable.

5. Easy maintenance: No need for regular anti-corrosion treatment, long service life, generally over 30 years.

3、 Preparation work before installation of stainless steel smoke exhaust duct

1. According to the structure and environment of the location where ventilation ducts need to be installed, design ventilation ducts to ensure their practicality.

2. The installation of ventilation ducts for general air supply and exhaust systems and air conditioning systems should be completed on the roof of the building, and the obstacles at the installation site should be cleared.

3. The installation of ventilation ducts for general dust removal systems needs to be carried out after the installation of process equipment related to air ducts in the factory has been completed, and the position of equipment connections or suction and exhaust hoods has been determined.

4. The construction preparation work has been completed, such as construction tools, lifting machinery and equipment, necessary scaffolding or lifting installation platforms are complete, and the construction equipment can meet the requirements.

5. To closely cooperate with civil construction, the installation holes and embedded support components should be pre drawn and checked to meet the design requirements.

6. All kinds of ventilation ducts, components, and accessories composed of ventilation and air conditioning system pipelines have been processed and passed quality inspection.

4、 Precautions for installation of stainless steel smoke exhaust duct

1. The length of the ventilation duct should generally not exceed 1.5 meters, so attention should be paid to the distance between the ventilator and the ventilation window.

2. Ventilation pipes should avoid being connected to the same flue as the exhaust pipe of gas water heaters to prevent hazardous gases from infiltrating the bathroom.

3. Open a circular hole with a diameter of 105mm on the wall to determine the location of the ventilation hole as a vent.

4. Even if a range hood is installed in the kitchen, it is recommended to install a ventilator diagonally above the range hood position. This can not only promote the function of the range hood during cooking, but also purify the kitchen air more after turning off the range hood.

5、 Maintenance of stainless steel smoke exhaust duct

1. The exhaust pipe should be regularly inspected and cleaned, especially at the 90 ° bend of the pipe at the kiln wall exhaust outlet, which is prone to corrosion and blockage.

2. This bend can be made of three-way cast iron pipe with blind plate, which is more heat-resistant and corrosion-resistant than steel pipe.

3. When there is a blockage, simply open the blind plate to clean it.

4. There are many methods for coating anti-corrosion of smoke exhaust fans. When adopting them, the service life and investment in anti-corrosion measures should be comprehensively considered, with the principle of economic durability.