Wholesale of stainless steel welded air ducts

NegotiableUpdate on 11/24

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

1、 Introduction to Wholesale of Stainless Steel Welded Ducts Stainless steel welded ducts play an important role in ventilation and air conversion, especially in ventilation equipment. They effectively connect various parts of the ventilation equipment together, making the ventilation equipment run more smoothly

Product Details

1、 Introduction to Wholesale of Stainless Steel Welded Ducts

Stainless steel welded air ducts play an important role in ventilation and air conversion, especially in ventilation equipment, effectively connecting various parts of the ventilation equipment together, making the ventilation equipment operate more smoothly. When designing, manufacturers should aim to ensure that enterprise users can achieve effective use while also saving money, maintenance costs, and increasing product added value.

2、 Characteristics of stainless steel welded air ducts

1. Simple connection: The installation of stainless steel welded air ducts reduces the number of connection points between pipes, thereby reducing leakage at the joint of pipe fittings to a low level. And connecting two products only requires one pipe connector.

2. Standardized products: Accessories for stainless steel welded air ducts, including fittings and joints, have been automated and systematized in production, with industrialized quality control.

3. Low installation cost: The installation time of the product is relatively short.

3、 Wholesale advantages of stainless steel welded air ducts

1. Service guarantee: During the cooperative sales and construction period, we will accurately control every small step for our customers, ensuring the timely and high-quality creation of every classic project.

2. High quality raw materials: Cooperating with well-known domestic steel companies, the plates are thick, corrosion-resistant, durable, and have a beautiful appearance.

3. Affordable price: Belonging to manufacturer direct sales, it can avoid the price difference earned by intermediaries.

4、 Method for aligning stainless steel welded air ducts

The alignment of stainless steel welded air ducts includes centerline alignment, horizontal alignment, and elevation alignment. The specific details are as follows:

1. Middle line alignment: The purpose of aligning the middle line of the air duct is to ensure that the position of the air duct is correct and not skewed. When aligning, use ink lines to mark the vertical and horizontal middle lines of the air duct on the wall surface. Then, use a spirit level to level the two ends of the air duct and move it until it intersects with the wall in the middle of the vertical and horizontal intersection.

2. Horizontal alignment: Horizontal alignment can be measured using a level or a level ruler with an accuracy of 0.1-0.3mm/m. Small diameter air ducts are generally measured with a level ruler.

3. Elevation alignment: The purpose of elevation alignment is to check whether the elevation of the centerline of the air duct matches the installation elevation required by the design, in order to ensure that the air duct can work within the allowable height. Elevation alignment can be measured with a level.

5、 Precautions for installation of stainless steel welded air ducts

1. Before connecting the stainless steel welded air duct to the equipment, it should be prefabricated and installed according to the actual drawings after waiting for the equipment connection to be completed.

2. In terms of components, if the equipment is connected to the air duct, the support and hanger must be separately set and cannot become the suspension point for the air duct.

3. After the double suspension bracket is in place in the air duct, it should ensure that the cross arm is straight, the suspension rod is not twisted, and the double suspension rod is evenly stressed.

4. The distance between the suspension point of the air duct and the air outlet, air valve, and automatic control mechanism should not be less than 200mm.

5. When installing the air duct, it is advisable to open openings for the inlet and outlet during the prefabrication of the air duct. If an air outlet needs to be opened on the installed air duct, the interface should be tight.

6. When installing air ducts, if they need to pass through walls or floors, protective sleeves must be used and non combustible flexible materials must be used for sealing. The thickness of the sleeve cannot be less than 1.6mm, because if the sleeve is too thin, it cannot be effective.