Sunshine aging test chamber
Product Name:sunlightaging test chamber
Product model:WSUN-150C
Product Introduction:
Sunshine aging test chamberThe xenon lamp, which is currently recognized as the best simulation of natural sunlight, is used as the light source and equipped with a filter suitable for the spectral requirements of the light fastness test. It is set between the light source and the sample, and temperature control, ventilation and other devices are installed in the instrument test chamber to simulate the test work under specific environmental conditions.
Execution standard: Strictly followGB/T16422.3,15422.1,AATCCM16, ASTM-D4459Design and manufacture according to relevant standards.
basicParameters:
Working Size |
D×W×H:500×500600(mm) |
power supply(kw) |
AC380V±10%50±0.5HzThree-phase five-wire system (Power:10KW) |
solar eye |
Intelligent irradiation induction circuit system designed by German chip. Automatically adjust the irradiation intensity setting value. High temperature resistance, high humidity resistance, shell304Material design and production. |
Safety protection |
Leakage, short circuit, overheating, water shortage, motor overheating, overcurrent protection |
Environmental temperature for use |
5℃~+30℃ ≤85%RH |
temperature range |
20~80℃ |
temperature fluctuation |
±1℃ |
Temperature uniformity |
±2℃ |
Humidity range |
25~90%RH±5% |
spectral wavelength |
290~800nm |
Xenon lamp radiation intensity |
45-300W/m2 accuracy≦±1W/m2 |
Xenon lamp tube power |
1.8KW |
From arc center toDistance of the sample |
200mmEffective exposure area≥ 3000cm2 |
Sample Holder |
500×500mm(Mesh sample rack, customizable according to requirements) |
sprinkler system |
Spray time59Minutes can be set, stop spraying time999Minutes can be set |
WEISSTECH website:
http://www.weisstech.com.cn
http://www.weiss.tech/
http://www.weiss.cx/
http://www.weiss17.com
http://www.qe-test.com