-
E-mail
shidaiyiqi@126.com
-
Phone
13381004667
-
Address
No.8 Wenhua East Road, Changping District, Beijing
Beijing Times Jiapeng Technology Co., Ltd
shidaiyiqi@126.com
13381004667
No.8 Wenhua East Road, Changping District, Beijing

Product Application:
With the development of science and technology and production, the workload of mechanical equipment continues to increase, and production efficiency and automation are becoming higher and higher. At the same time, equipment is becoming more complex, and the relationships between various parts are becoming increasingly close. Often, a small fault in a certain area triggers a chain reaction, causing catastrophic damage to the entire equipment and even the environment related to the equipment. This not only causes huge economic losses, but also endangers personal safety, with extremely serious consequences. Therefore, it is extremely important to adopt equipment fault vibration analysis technology to ensure the reliable and effective operation of the equipment.
vibration meter-As an important tool for monitoring and diagnosing faults in rotating machinery, vibration analyzers have been widely promoted and applied in industrial and mining fields, especially in identifying the cause of faults through vibration spectrum analysis, which has been accepted by most on-site technicians.vibration meter-The vibration analyzer first collects vibration signals through a data collector. Generally, the raw data obtained is in the form of time-domain waveforms, which are intuitive, easy to understand, and have obvious characteristics for certain fault signal waveforms. Therefore, time waveforms can be used for analysis first, such as imbalance, misalignment, and impact, which are most obvious in the time-domain waveform.
Features:
●vibration meterIt has five measurement modes: three parameter measurement mode, dynamic time-domain waveform measurement mode, dynamic spectrum measurement mode, data acquisition mode, and speed measurement mode;
Capable of measuring 1-2 channel spectra and time-domain waveforms;
● Measurable peak acceleration, effective velocity, and peak to peak displacement;
Users can set the passband cutoff frequency of the filter according to their own needs, with a step size of 100Hz;
● It can dynamically and real-time display the measured vibration waveform (time-domain waveform);
● Can dynamically display vibration spectrum;
● Can perform axis trajectory analysis;
The photoelectric speed sensor can obtain accurate equipment speed values;
● Can perform continuous data collection within 20 seconds;
● Can perform simple fault diagnosis: issue a warning when the measured value exceeds the warning value, and issue an alarm when it exceeds the alarm value;
● It has powerful data management and browsing functions: there are a total of 50 storage points, and the storage capacity under each point number is unlimited (data is stored in file form). Can browse vibration parameter values, vibration waveforms, vibration spectra, continuous data acquisition, and speed values;
● Connected to a micro printer, it can print measurement data, waveforms, and spectrograms;
● Battery: Lithium battery, with long usage time, can be charged and used immediately, safe and reliable (equipped with automatic protection device);
Color LCD display, automatic shutdown function, buzzer alarm, etc.
Technical Specifications:
|
Sensitivity of acceleration probe (mVrms/g) |
measurement parameters |
measurement range |
|
1.0 – 9.9 |
Acceleration (m/s2) |
1 – 2,000 |
|
Speed (mm/s) |
1 – 2,000 |
|
|
Displacement (μ m) |
10 – 20,000 |
|
|
10 – 99 |
Acceleration (m/s2) |
0.1 – 200 |
|
Speed (mm/s) |
0.1 – 200 |
|
|
Displacement (μ m) |
1 – 2,000 |
|
|
frequency range |
Acceleration: 5Hz~10000Hz |
|
|
speed range |
300-60000 RPM (speed variation less than ± 2%) |
|
|
allowable error |
±5% |
|
|
temperature range |
0℃~40℃ |
|
|
humidity range |
≤80%RH |
|
Standard configuration:
vibration meterHost, input 220V/50Hz or 110V/50Hz (output 9V/4A power adapter)vibration meterProbe TSV-03, magnetic suction seat (including 2 connecting bolts), user manual for host leather cover, SD card (2G), product packaging box
Optional attachments:
RS232 printing cable, UP-NH32 thermal printer, probe assembly, software, photoelectric key phase sensor
Product List(Click on the corresponding text to enter the detailed introduction of the corresponding product)
hardness testerSeries:Leeb hardness tester、Brinell hardness tester、Vickers hardness tester、Rockwell hardness tester、Blowe hardness tester、Ultrasonic hardness tester、Shore hardness tester、Vickers hardness tester
thickness gaugeSeries:Coating thickness gauge、Ultrasonic thickness gauge、Coulombic electrolytic thickness gauge
Ultrasonic flaw detector:Ultrasonic flaw detector、Magnetic Particle Inspection Machine
roughness meter:roughness meter、Anchor texture tester (shot blasting roughness tester)
vibration meter:Portable vibration meter
Infrared Thermometer:Infrared Thermometer
Electric spark leak detector:Electric spark leak detector (leak detection of anti-corrosion coating)
colorimeter:Precision colorimeter