The ten station condom pinhole leakage tester is trustworthy

The ten station condom pinhole leakage tester is trustworthy The ten station condom pinhole leakage tester is trustworthy

1Product Introduction

The condom needle hole leakage inspection table is suitable for testing the leakage of condoms. It meets the technical requirements and testing methods of GB7544-2009 natural latex rubber condoms. Condom pinhole leak tester is a device specifically designed to detect whether condoms have pinhole leaks. It usually consists of a container and an air pump. When using, place the condom into a container and then use an air pump to inject a certain pressure of air into the container. If a condom has a pinhole that leaks water, air will escape from the pinhole, creating bubbles or other indications so that the user can detect the problem and replace the condom in a timely manner. This testing device can help ensure the integrity and reliability of condoms, thereby increasing the testing space for contraceptive effectiveness workstations. It can also perform sample testing simultaneously on a rotating test bench, making it convenient to observe and monitor different sample results. The funnel-shaped filling port is also convenient for users to operate.Customized anti leakage clamping device to avoid damaging the sample and ensure the accuracy of the test.

IICore detection principle

Water pressure infiltration method
Inject 300ml ± 10ml of water and suspend to observe surface leakage, then roll onto colored absorbent paper for secondary verification of leakage traces, meeting the requirementsGB7544Appendix L Specification.

threeKey pointsTechnical Specifications‌

‌four、Implement standards and operating procedures

1. Compliant with standards

This instrument complies with standards: GB7544, ISO23409, ASTM D6324

2. Operation steps

（1）Preparation work: Ensure that the tester is clean and has sufficient air supply pump for use.

（2）Open the tester: Open the container part of the tester, usually a transparent container or cover.

（3）Insert the condom: Place the condom to be tested into the container of the testing device and ensure that it is fully deployed.

（4）Inject air: Use an air pump to inject a certain pressure of air into the container of the tester until the predetermined pressure is reached. Usually, the tester comes with a pressure indicator or regulating valve so that you can control the pressure.

（5）Observation result: Observe whether there are bubbles or other indications on the condom. If a condom has a pinhole that leaks water, air will escape from the pinhole and produce bubbles or other visible indicators in the testing device.

（6）Result judgment: Determine whether the condom has passed the test based on the instructions of the tester or the user manual. If no bubbles or other indications appear, the condom is considered intact. If there are bubbles or other indications, the condom may have a pinhole leak and needs to be replaced.

5Configuration List

1 host;

1 set of testing software;

1 copy of instruction manual;

1 certificate of conformity;

1 warranty card;

One copy of the delivery receipt;

1 nameplate;

1 power cord;

1 set of wrench;

Several brochures;

1 measuring cup;