Wiring Method for SMART-2097 Intelligent Multi frequency Eddy Current Tester

SMART－2097Wiring method for intelligent multi frequency eddy current detectorThe uniqueness lies in the use of advanced DSP parallel digital processing technology, real-time multi frequency eddy current detection technology, and microprocessor technology, which can effectively detect defects in metal material components in real time, distinguish alloy types and heat treatment states, as well as thickness changes. SMART-2097 can preset parameters and expert programs according to user needs, with easy operation, human-machine dialogue, screen menu prompts, and online hotkey assistance.

Functional information

·Two independent detection frequencies
·Fast and high-precision/digital electronic balancing
·Automatic/manual amplitude and phase measurement
·Non equal amplitude phase/amplitude alarm
·The excitation amplitude of the probe can be adjusted by pressing the button
·Dual impedance plane graph and one baseline display
·High brightness, wide viewing angle EL electroluminescent screen
·The host is equipped with a rechargeable lithium battery
·Can work continuously for more than 5 hours
·Selection between Cartesian and Polar Coordinate Systems
·Automatic calendar, time display
·Easy to operate, with optional interfaces in both Chinese and English
·Communication via serial/parallel interface (connected to PC)

Wiring method for intelligent multi frequency eddy current detectorTechnical Specifications

Size and weight:
Size: 250 * 120 * 107mm Weight: 2.375kg
Power supply: external adapter (DC 18V), built-in lithium battery (14.8V 4AH)

Work environment:
Working temperature: -20 ℃~+55 ℃
Storage temperature: -20 ℃~+50 ℃
Relative humidity: not exceeding 85%

Eddy current testing:
1. Channel: 1
2. Frequency: 2
3. Mixing unit: 1 unit
4. Frequency range: 64 Hz to 5 MHz
5. Gain: 0-90dB, minimum step size 0.5dB
6. Phase rotation: 0-359 °, step 1 °
7. Gain ratio (Y/X): 0.1/10
8. Amplitude/phase measurement: automatic/manual
9. Display mode: dots/lines/blanking
10. High pass filtering: 0-500Hz
11. Low pass filtering: 10-10000Hz
12. Number of digital filter points: 1-100
13. Probe excitation signal amplitude: 1-8 levels
14. Storage of detection signal diagram: 100 sets
15. Parameter storage: 100 sets
16. Display screen: 5.7-inch, 320 * 240
17. Microprocessor: 16 bit
18、 存储器： 96M
19. Memory capacity: 128M

Application fields:

·General defect assessment (surface inspection of aircraft components such as blades, hubs, landing gear, etc.)
·Cracks on the inner surface of rivet holes or bolt holes can be detected without disassembling or removing fasteners, and surface cracks on various metal components and ferromagnetic welds can be detected
·Detect changes in thickness of thin plates (wear, rust, mechanical wear, etc.)
·Measurement of thickness of non-conductive coatings or plating on conductors
·Detect various non ferromagnetic heat exchanger tubes such as copper, titanium, aluminum, zirconium, etc. in service (including cracks, wall thickness, corrosion, etc.)
·Detecting interlayer gap corrosion in composite materials, such as testing multi-layer structures, aluminum skins, and fuselage wing joints of aircraft
·Monitor changes in heat treatment status and material sorting
·The instrument has added the function of detecting weld seams and crack depth measurement for anti-corrosion coatings (optional). Specially suitable for in-service and pre service testing in fields such as aviation, aerospace, power, and petrochemicals

Shanghai Jiuheng Instrument Co., Ltd. is an enterprise specializing in the research and development, production, sales, and service of instruments and meters. Ultrasonic flaw detectors: (EPOCH 600 ultrasonic flaw detector, EPOCH 6LT ultrasonic flaw detector, EPOCH 650 ultrasonic flaw detector, EPOCH 1000 ultrasonic flaw detector, USM 36 ultrasonic flaw detector, USN 60 ultrasonic flaw detector, USM go+ultrasonic flaw detector, Ominskan SX phased array flaw detector, OmniScan MX2 phased array TOFD flaw detector); Ultrasonic thickness gauge: (27MG ultrasonic thickness gauge, 45MG ultrasonic thickness gauge, 38DL PLUS ultrasonic thickness gauge, DM5E ultrasonic thickness gauge, CL5 ultrasonic thickness gauge, MAGNA-MIKE 8600 Hall effect thickness gauge, ETG-100 electromagnetic high-temperature thickness gauge); Ultrasonic probe; Customized phased array probe; Eddy current flaw detector: (NORTEC 600 eddy current flaw detector); Hardness tester; Endoscopes: (IPLEX NX Olympus Endoscope, IPLEX GX/GT Olympus Endoscope, IPLEX G Lite Olympus Endoscope, IPLEX TX Olympus Endoscope, IPLEX YS Olympus Endoscope, XLGo+Industrial Video Endoscope GE, XL Detect+Industrial Video Endoscope GE New, UVin Professional UV Video Endoscope); Pulse generator: (DRP300 replaces Olympus' 5072PR, 5073PR); Alloy analyzer: (Vanta Olympus handheld alloy analyzer, DELTA Professional handheld alloy analyzer Olympus, DELTA Element handheld alloy analyzer Olympus) and other instruments and meters. Shanghai Jiuheng Instrument Co., Ltd. SWC-2 transverse wave coupling agent, coupling agent for transverse wave probes.