YLW series thermal oil boiler

NegotiableUpdate on 10/24

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Product features: Coal water slurry thermal oil boiler can achieve high working temperature at low operating pressure, with technical characteristics of low pressure and high temperature

Product Details

Product Features

●Coal water slurry thermal oil boilerIt can achieve high working temperature at lower operating pressure and has the technical characteristics of low pressure and high temperature.
● It can achieve stable heating and precise temperature regulation to meet different requirements.
Under various levels of load, the thermal efficiency can be maintained at the optimal level.
Equipped with complete operation control and safety monitoring devices, easy to operate, safe and reliable. Closed loop circulation, liquid-phase transportation of heat energy, low heat loss, significant energy-saving effect, and low operating cost.
Quick installation or assembly at the factory, convenient transportation, short installation cycle, and quick production results.
The structure is compact and can be arranged separately, saving investment in the boiler room.
The boiler has good insulation performance, using efficient insulation materials and advanced construction technology, resulting in minimal heat loss from the furnace wall.

Main performance parameters of organic heat carrier boilers
Boiler model project	YGL 120MW	QXG 0.24	YGL 350MW	QXG 0.45	QXG 0.7	QXL 1.4	LYG ▲ 0.13	LYG ▲ 0.15
Thermal power MW	0.12 (10)	0. 24 (20)	0.35 (30)	0. 45 (40)	0. 7 (60)	0. 45 (120)	0. 13 (10)	0. 15 (12)
Thermal efficiency%	>65*	>65	>69.7*	>68	>70	>74	>62	>62
Rated working pressure (Mpa)	1	1	1	1	1	1	0.6	0.3
Coal consumption during full load operation (Kg/h)	21.9	58.0	61.2	82.9	120.2	316.5	31.6	31.6
Heating surface area m 2	14	25.6	48.28	48.3	62.7	101.3	11.72	6.86
Rated working temperature ℃	300	300	300	300	300	300	300	300
Furnace content oil quantity m 3	0.21	0.3	0.38	0.6	0.8	1.1	0.45	0.6
Circulating oil quantity m 3	8.22	30	23.8	40	60	100	/	/
Dimensions (length x width x height) mm	Φ 1350 x2.055	1800 x1800 x3600	2291 x2079 x2165	2000 x2000 x4200	5800 x2004 x5000	7500 x2800 x6000	1800 x1700 x2500	1800 x1678 x2520
Total installed capacity (KW)	5.1	7.5	10.25	15	15	30	/	/
Pipe connection diameter Dn (mm)	40	40	80	80	10	125	80	80
Total weight of equipment (Kg)	2882	3412	7072	8200	14800	19500	3072	3072
Note: The full load coal consumption of the boiler is calculated based on Class II bituminous coal (dw=21320KJ/Kg) The thermal efficiency band * is the design thermal efficiency band ▲ for gas-phase heat transfer oil furnaces

Main performance parameters of organic heat carrier boilers
Boiler model project	YLL1.2	YLL 0.95	YGL 1.2	YGL 0.95	YLL 1.4	YGL 1.4	YGL 0.01 2	YLL 1.8	YLW 1.8	QGL ▲ 350
Thermal power MW (10000 Kcal)	1.2 (100)	0.95 (80)	1.2 (100)	0.95 (80)	1.4 (120)	1.4 (120)	0.012 (1)	1.8 (150)	1.8 (150)	0.35 (30)
Thermal efficiency%	>74.9	>70.2	>72.7	>70	>74.67	>65	>69.83	>74.4	>74.45	>62.9
Rated working pressure (Mpa)	0.7	0.7	0.7	0.7	1.0	1.0	0.7	0.7	0.7	0.3
Coal consumption during full load operation (Kg/h)	326	275	481.7	228.8	251.8	628.7	2.1	407.7	407.7	74.8
Heating surface area m 2	74.3/34	74.3	74.3/34	74.3	86.2/27.5	86.4	3.06	107.3/32	83.6/32	12.57
Rated working temperature ℃	300	300	300	300	300	300	280	300	300	300
Furnace content oil quantity m 3	0.86	0.86	0.86	0.86	0.95	0.95	0.011	1.4	1.4	1.0
Circulating oil quantity m 3	69.9	55.33	69.89	55.3	81.5	81.5	2.12	84.1	104.8	/
Dimensions (length x width x height) mm	4750 x2162 x1780	4750 x2162 x1780	2440 x2360 x3590	2440 x2360 x3590	5050 x2165 1780	2530 x2410 x3550	Φ 1000 x1400	5850 x2162 x1780	5850 x2162 x1780	1800 x1800 x3109
Total installed capacity (KW)	40.5	25.5	41.25	26.25	45.75	43.95	1.5	41.75	56.75	1.0
Pipe connection diameter Dn (mm)	125	125	125	125	125	125	25	125	150	100
Total weight of equipment (Kg)	16600	16432	9710	9710	18990	11033	1300	22022	29529	4900
Note: The full load coal consumption of the boiler is calculated based on Class II bituminous coal (dw=21320KJ/Kg) Gas phase thermal oil furnace with ▲

Main performance parameters of organic heat carrier boilers
Boiler model project	YLW 7.0 (600)	YLW6 (500)	YLW 5.0 (420)	YLW 3.5 (300)	YLW 4.2 (360)	YGL 0.24 (20)	YGL 0.12 (10)	YGL 0.75 (60)	YGL 0.95 (80)	YLW 2.3 (200)
Thermal power MW (10000 Kcal)	7.0 (600)	6.0 (500)	5.0 (420)	3.5 (300)	4.2 (360)	0.24 (20)	0.12 (10)	0.75 (60)	0.95 (80)	2.3 (200)
Thermal efficiency%	>76	>76	>74	>74	>75	>65	>65	>70	>67.7	>74.95
Rated working pressure (Mpa)	0.7	1.0	1.0	1.0	1.0	1.0	1.0	1.0	0.7	0.7
Coal consumption during full load operation (Kg/h)	1546	1323	1128	791	943	53	26.4	145	409.8	517.3
Heating surface area m 2	479	413.5	291	180	255	23	14	63	74.3	83.6/32
Rated working temperature ℃	300	300	320	320	320	300	300	300	300	300
Furnace content oil quantity m 3	4.1	3.5	3.01	2.92	2.71	0.25	0.12	0.92	0.81	1.6
Circulating oil quantity m 3	394	280	70	200	58	16.7	10	51.9	55.33	134
Dimensions (length x width x height) mm	8720 x3400 x5400	7840 x3400 x6340	7300 x3200 x5750	6900 x2720 x5280	6600 x3200 x5750	1945 x1600 x2690	Φ 1350 x2055	1886 x2625 x2405	2440 x2360 x3590	5850 x2162 x1780
Total installed capacity (KW)	163.5	135	138	92.5	119.5	6.6	5.1	23.6	33.25	61.75
Pipe connection diameter Dn (mm)	273	273	219	159	219	57	45	108	125	150
Total weight of equipment (Kg)	63360	60023	43410	32680	46180	3630	2654	7010	9710	23559
Note: The full load coal consumption of the boiler is calculated based on Class II bituminous coal (dw=21320KJ/Kg) The thermal efficiency band * is the design thermal efficiency