-
E-mail
2441747304@qq.com
-
Phone
18136659918
-
Address
148 Huaihai Road, Qinhuai District, Nanjing City
Product Categories
Nanjing Jinnuo Instrument Co., Ltd
Bend tube flowmeter
NegotiableUpdate on 12/25
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Installation, model, and manufacturer of bend tube flowmeter. The intelligent bend tube flowmeter is a product of differential pressure flowmeter. This flowmeter utilizes the centrifugal force generated by the circular motion of fluid passing through the bend tube sensor, which forms a pressure difference △ P on the inner and outer sides of the bend tube sensor. The magnitude of this pressure difference △ P is related to the fluid flow velocity, fluid mass (density), and curvature radius of circular motion. The average flow velocity V of the fluid is proportional to the square of the pressure difference △ P.
Product Details
Installation, model, and manufacturer of bent pipe flowmeterFeatures:
There are no inserts or throttling components inside the sensor, and there is no pressure loss.
Suitable for measuring dirty gases and not easily clogged.
The sensor is suitable for a wide temperature and pressure range: -50~600 ℃, 0~30Mpa.
The straight pipe section has low requirements, with the first 5D and the second 2D.
Large caliber sensors can be retrofitted online using on-site 90 ° elbows.
Sensors can operate under harsh conditions such as high temperature, high pressure, dust, vibration, and humidity.
Expert algorithms for the full range range range, especially for measuring steam. With changes in temperature and pressure, superheated steam often transforms into saturated steam, forming a two-phase flow medium of steam and liquid. The algorithm compensates for the influence of gas-liquid two-phase flow medium on mass flow measurement, ensuring measurement accuracy.
Intelligent bend tube flowmeter for measuring medium:
Liquids: hot water, cold water, light oil, chemical liquids.
Gas: blast furnace gas, coke oven gas, mixed gas, various single component multi-component gases.
Overheated steam, saturated steam.
Compressed air.
Natural gas, liquefied gas, and torch gas.
Installation, model, and manufacturer of bent pipe flowmeterClassification:
|
Bend sensors are divided into L-type and S-type. The L-shaped sensor is installed at the 90 ° natural bend of the on-site pipeline, while the S-shaped sensor can be installed on any straight pipeline in any space. The connection method with the pipeline is welding or flange connection. L-shaped sensor Applicable pipe diameter: DN15~4000mm Bending diameter ratio: R/d 1.0~5.0
| ||||||||||||||||||||||||||||||||||||||||||
| S-type sensor Applicable pipe diameter: DN15~4000mm | ||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||
| S-bend diameter ratio 1.5 sensor length table | ||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||
Similar Product Recommend