Thermal oil orifice flowmeter

NegotiableUpdate on 12/25

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Thermal oil orifice flowmeter is a high range ratio differential pressure flow device composed of standard orifice plate and differential pressure transmitter (or multi parameter differential pressure transmitter, temperature transmitter and pressure transmitter), which can measure the flow of gas, steam, liquid and natural gas. It is widely used in process control and measurement in the fields of petroleum, chemical, metallurgy, power, heating, water supply, etc.

Product Details

1Thermal oil orifice flowmeterFeatures:

The structure of the throttling device is easy to replicate, simple and sturdy, with stable and reliable performance, long service life, and low price.
▲ Calculation of orifice plate adopts standards and processing
▲ Wide application range, all single-phase flows can be measured, and some mixed phase flows can also be applied.
The standard throttling device does not require real flow calibration and can be put into use.
The installation of integrated orifice plates is simpler, without the need for pressure pipes, and can be directly connected to differential pressure transmitters and pressure transmitters.
Intelligent features
▲ Adopting imported monocrystalline silicon intelligent differential pressure sensor
▲ High precision, comprehensive self diagnostic function
The range of the intelligent orifice flowmeter can be self programmed and adjusted.
▲ It can display cumulative flow rate, instantaneous flow rate, pressure, and temperature simultaneously.
▲ In addition to online and dynamic full compensation functions, it also has self diagnosis and self setting range.
▲ Equipped with multiple communication interfaces
▲ High stability
▲ Wide range, greater than 10:1
Intelligent technical indicators
▲ High precision: ± 0.075%
▲ High stability: better than 0.1% FS/year
▲ High static pressure: 40MPa
▲ Work continuously for 5 years without the need for calibration
▲ Temperature and static pressure effects can be ignored
▲ Anti high overvoltage

IIThermal oil orifice flowmeterComposition of throttling device:

Throttling components: standard orifice plate, standard nozzle, long diameter nozzle, 1/4 circular orifice plate, double orifice plate, eccentric orifice plate, circular orifice plate, conical inlet orifice plate, etc

Pressure collection device: ring chamber, pressure collection flange, clamping ring, pressure pipe, etc

Connecting flanges (national standards, various standards, and flanges from other design departments) and fasteners.

Measuring tube

Scope of application and relevant technical indicators of throttling device

Name of throttling component			Applicable pipeline （DN mm）	Applicable diameter ratio B (d/D)	Application Features	Uncertainty of outflow coefficient Ec%	design standards
Corner joint pressure standard orifice plate		Circular chamber type	50-500 50-500	0.2－0.75 0.2－0.75	Suitable for measuring flow rate under high temperature and high pressure conditions in cleaning media with GD structure	0.6－0.75%	ISO5167 GB/T2624－93
		Clamping ring type	50-500	0.2－0.75	Easy to remove dirt and can be used for measuring the flow rate of fluids that are not very clean
		Oblique drilling type	450－1000（3000）	0.2－0.75
Flange pressure gauge standard orifice plate			50-1000	0.2－0.75	Easy to remove dirt and suitable for various media	0.6－0.75%	ISO5167 GB/T2624－93
Radial distance pressure standard orifice plate			50-1000	0.2－0.75	Easy to remove dirt and suitable for various media	0.6－0.75%	ISO5167 GB/T2624－93
Corner joint pressure standard nozzle (ISA1932 nozzle)			50-500	0.3－0.8	Low pressure loss, long lifespan, especially suitable for steam flow measurement	0.8－1.2%	ISO5167 GB/T2624－93
Long diameter nozzle			50-630	0.2－0.8	Low pressure loss and long lifespan, the LGP type long diameter nozzle component is suitable for high parameter water and steam flow measurement	2%	ISO5167 GB/T2624－93
Classic Wenqiu Li Guan	Mechanical processing type		100-800	0.2－0.8	Low pressure loss, requiring a straight pipe section smaller than the orifice plate and nozzle	1%	ISO5167 GB/T2624－93
Classic Wenqiu Li Guan	Coarse welded iron plate type		200－1200（2000）	0.4－0.7		1.5%	ISO5167 GB/T2624－93
Wenqiu Li nozzle			65-500	0.316－0.77	Ditto.	1.2－1.75%	ISO5167 GB/T2624－93
1/4 round hole plate			25-150	0.245－0.6	Suitable for low Reynolds numbers	2.0－2.5%	DIN BS
Conical inlet orifice plate			25-250	0.1－0.316	Ditto.	2%	BS
Circular perforated plate			50-1500	0.32－0.8	Suitable for measuring fluids contaminated with air bubbles or containing solid particles.	1.5%	DIN
Eccentric orifice plate			100-1000	0.46－0.84		1－2%	ASME
Small hole plate			12.5－40	0.2－0.75	Suitable for small pipeline flow measurement	0.75%	ASME
Lens type orifice plate			12.5－150	0.2－0.75	Suitable for flow measurement of high-pressure and room temperature small pipelines	0.6－0.75%	ISO5167ASME
End hole plate			Greater than or equal to 15	0.2－0.62		1.5－2.0%
Double orifice plate			25-400	0.2－0.8	Suitable for high flow measurement
orifice plate