Intelligent power frequency withstand voltage test device

YDJ(Z)-5KVA/50kVIntelligent power frequency withstand voltage test deviceAdopting a single frame core structure. The primary winding is wound around the iron core, with the high-voltage winding outside. This coaxial arrangement reduces leakage flux and thus increases coupling between windings. The outer shell of the product is made into an octagonal structure that matches well with the core, giving the overall appearance a beautiful and elegant look. The external structural diagram is shown in Figure 1, and the internal structural diagram is shown in Figure 2.

‍

1. Short circuit rod D 2. Equalizing ball 3. High voltage bushing 4. Transformer handle
5-Oil valve 6-7 times pressure input a, x 8~9-measuring terminals E, F
10- Transformer shell grounding terminal 11- High voltage tail X 12- High voltage output A
13- High voltage silicon stack 14- Transformer oil 15- Iron core
16 low voltage winding 17 measuring winding 18 secondary high voltage winding

In YDJ (G) and TDM (G) test transformers, a and x are low voltage input terminals, E and F are instrument measurement terminals, and A and X are high voltage outputs. There is no high-voltage silicon stack in the YDJ (G) series.

The YDJ (G) and TDM (G) test transformers are single-phase transformers, connected to group I. I. They are connected to the XC/TC (a special equipment for test transformers produced by our company, please refer to its specific user manual for detailed information) series operation box (set) using a power supply of 220V (380V above 10KVA). The voltage is adjusted to 0-200V (or 0-400V) by an autotransformer (attached to the regulator above 50KVA) inside the operation box and output to the initial winding of the YDJ (G) and TDM (G) test transformers. According to the principle of electromagnetic induction, the high voltage required for the test can be obtained in the high voltage winding of the test transformer.

YDJ(Z)-5KVA/50kVIntelligent power frequency withstand voltage test deviceIt is a specialized supporting equipment for the lightweight test transformer produced by our company. The control box has the characteristics of easy use and maintenance, excellent performance, safe and reliable use, beautiful appearance, durability, and easy mobility. It is power supply enterprises, large factories, metallurgy, power plants, railways, etc. that require power maintenance departmentsEquipment.
This product adopts advanced microelectronics processing technology, and the entire usage process can be pre-set. It has a fully Chinese interface and simple and clear operation. All test items are automatically tested after being set, without the need for manual intervention.