Metal rotor flowmeter vertical type

NegotiableUpdate on 12/25

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The metal rotor flowmeter is a vertical type with a variable area measurement principle, suitable for measuring the flow rate of various liquids and gases. The flowmeter adopts an all metal structure, including on-site indication type, data remote transmission type, corrosion-resistant type, high temperature and high pressure type, jacket type, and explosion-proof type. It has standard analog signal output and on-site indication of 0-10mA and 4-20mA, cumulative digital communication, on-site modification of measurement parameters, different power supply mode functions, and can be equipped with magnetic filters and special specifications. Widely used for measuring and controlling various media in complex and harsh environments such as petroleum, chemical, power generation, pharmaceuticals, food, water treatment, etc.

Product Details

The metal rotor flowmeter is suitable for measuring the flow rate of small-diameter and low velocity media within DN200; Reliable work, minimal maintenance, and long lifespan; The requirements for straight pipe sections are not high; A wider flow ratio of 10:1; Dual row large LCD display, optional on-site instantaneous/cumulative flow display, with backlight single axis sensitive indication; Non contact magnetic coupling transmission; All metal structure,Metal tube rotor flowmeter vertical typeSuitable for high temperature, high pressure, and highly corrosive media; Can be used in flammable and explosive hazardous environments; Optional two-wire system, battery, and AC power supply methods; Multi parameter calibration function; Equipped with data recovery, data backup, and power down protection functions.Metal rotor flowmeter vertical typeIt is the basic form of a rotor flowmeter and a widely used rotor form in the market. The flow of the medium from bottom to top drives the up and down movement of the float, changes the pipeline area, and uses the principle of magnetic coupling to display the flow rate of the medium through the pipeline on the instrument. The display function of the indicator includes displaying instantaneous flow rate, LED displaying instantaneous flow rate and cumulative flow rate, remote transmission, explosion-proof design, electromagnetic power supply, and can be equipped with magnetic filters of the same material,

IIMetal rotor flowmeter vertical typeBasic Parameters:

Flow meter diameter DN15, DN25, DN50, DN80, DN100, DN125, DN150 (please consult with the manufacturer for other diameters)

▲ Flow range: Liquid: 1.0-150000l/h Gas: 0.05-3000m3/h (see flow table on page 11 for flow range)

▲ Range ratio 10:1, 20:1 (special)

▲ Accuracy level 1.5, 1.0 (special)

▲ Pressure rating DN15, DN25, DN50: 4.0MPa (up to 20MPa)

DN80、DN100、DN150：1.6MPa （大：DN80：10MPa； DN100：6.4MPa； DN150：4.0MPa）

▲ The power supply is 24VDC (12-36VDC), and the rated current of the explosion-proof type is 200mA

▲ Output signal 4-20mADC (two-wire system), can be equipped with HART protocol.

▲ Output load 500 Ω (when powered by 24V)

▲ Environmental temperature -30 ℃~60 ℃

▲ Storage conditions Temperature: -40 ℃~85 ℃ Humidity: ≤ 85%

▲ Connection method: flange connection, flange standard: GB/T9119-2000, users can choose (other connection methods can be negotiated with the manufacturer)

▲ Cable interface M20 × 1.5, cable diameter range is 7 to 10mm

▲ Shell protection IP65

▲ Explosion proof mark Explosion proof type: ExdIICT6Gb Intrinsic safety type: Ex ia Ⅱ CT6 Ga

▲ For detailed pressure loss, please refer to the flow chart

▲ 介质粘度 DN15：η＜5mPa.s DN25：η＜250mPa.s DN50～DN150：η＜300mPa. s

▲ Liquid receiving material R1:304, 1Cr18Ni9Ti; Ro：316，0Cr18Ni12Mo2Ti；

RL：316L，00Cr17Ni14Mo2Ti； Ti：钛合金；

Rp: PTFE lining.