Tubular electric heater

The sheathed tubular electric heater consists of a heating core and a protective sleeve. The heating core uses a tubular electric heating element as the heat source, and the protective sleeve is made of thin stainless steel. It has a large heat dissipation area and fast heat transfer. The terminal device is divided into ordinary type (using iron stretched cup type cover) and special type (using bolt type explosion-proof device cover sealing). The special type has the requirements of meeting the explosion-proof mark dIICT4 and the protection level IP65 series standard.

The company adheres to the business philosophy of "creating quality products with character and serving society with quality products", and actively provides pre-sales, in sales, and after-sales services with the aim of serving customers. We solemnly promise to make products with dedication and provide satisfactory services.

Instructions for Use:
1. The working voltage shall not exceed 1.1 times its rated value, and the casing shall be grounded.
2. The dimension "B" in the picture should be fully immersed in oil (and checked regularly) to avoid burning out, and the heated oil should be free of corrosive gases.
3. The installation hole size is 65mm.
4. This model of electric heater is designed according to the JB2379-78 standard for flowing oil, with a surface load of 2-3.8 w/cm2 on the heater
5. When selecting, the size of the heater should be determined based on the actual size of the heating medium.
Note:Tubular electric heaterCan be directly mixed with SRY2 and SRY4 types.

Main technical parameters, specifications, and length:

Rated voltage: single-phase 220V, three-phase 380V
Working medium: Mineral oil, water and other media with good heat dissipation effect
Surface heating power: 1KW-4KW1.5w/cm2 5KW-8KW2.5 w/cm2
Work pressure: 0.6Mpa
The HRY14 electric heater is an improved wiring device and heating structure based on the SRY2 ordinary electric heater. It uses three heating tubes as a group, which greatly reduces the surface load of the heater and can directly replace the SRY2-SRY4 heater.

Tubular electric heaterFeatures:

1. This electric heater consists of a heating core and a protective sleeve. The heating core uses a tubular electric heating element as the heat source, and the protective sleeve is made of thin stainless steel. It has a large heat dissipation area and fast heat transfer. The terminal device is divided into ordinary type (using iron stretched cup shaped cover) and special type (using bolt type explosion-proof device cover sealing). The special type has the requirements of meeting the explosion-proof mark dIICT4 and the protection level IP65 series standard.

2. The electric heater is connected to the fuel tank container body via a flange, and a protective sheath isolates the heating element from the heated oil. When repairing the electric heater, there is no need to drain the oil from the fuel tank. Simply remove the heating element and replace it with a new one, making maintenance convenient.

3. When designing, the contact area between the sheath and the hot oil should be considered to prevent local carbonization of the oil due to high heating temperature. This type of heater is only suitable for heating heat transfer oil or oil with good heating effect and medium.