Zerui produces customized fully automatic cement press machines, concrete pressure testing machines, and concrete testing machines

The fully automatic constant stress testing machine is mainly used to test the compressive strength of building materials such as bricks, stones, cement, and concrete. Using hydraulic power, the pressure on the specimen is directly read on the display screen of the dynamometer.

Introduction to the structure of the fully automatic constant stress testing machine: This testing machine is mainly composed of a frame, a force measuring mechanism, an electrical system, a hydraulic system, etc.

Installation of fully automatic constant stress testing machine

The testing machine should be installed on a precast concrete foundation of 1200 × 650 × 200mm, and the level should be calibrated using a frame level with a division value of 0.02mm/m. The distance between the machine and the wall should be greater than 0.8 meters.

Operation steps of fully automatic constant stress testing machine

1. Before use, check whether the oil in the fuel tank is sufficient.

2. Connect the power, press the start button, close the oil return valve, slowly open the oil delivery valve, and raise the piston.

3. Adjust the oil delivery valve and conduct a loading test. When loading, accelerate steadily and adjust the loading speed according to the loading speed displayed on the screen; When the test force value does not increase, it indicates that the specimen has been crushed, and the return valve should be immediately opened to allow the oil cylinder to enter

The oil flows back into the tank.

4. Record the test force value, refer to the manual of the intelligent force measuring instrument for testing, data statistics, etc.

5. When no longer conducting experiments, open the return valve, close the supply valve, and cut off the power supply.

Advantages of cement pressure plate equipment:

1. The production of raw materials is simple and there are no regional restrictions. Mainly using cement, sand, fly ash, various insulation materials, short cut fibers or fiberglass cloth, etc., processed and formed in one go by this equipment. The production process is simple, the cost is low, the investment is small, and the effect is fast.

2. The equipment has a high degree of automation, simple operation (operators can take up their posts after simple training), low labor intensity, assembly line operation, and no noise, pollution, or three waste emissions in the production process.

3. The production process has low energy consumption, does not require high temperature or high pressure, and can be formed in one go at room temperature without special requirements for production site and other conditions

4. We can produce various insulation boards of different specifications (length, width, height) and materials according to the different requirements of different customers, to meet the needs of different consumers.

Cangzhou Zerui Experimental Instrument Co., Ltd. is engaged in independent production and agency sales. Our independent products are strictly produced according to standards, with relevant parameter testing qualified. Starting from details, we strictly control the quality, do not cut corners or reduce processes, and strive for excellence. The main product series now include: pressure testing machine equipment, asphalt testing equipment, cement testing equipment, concrete testing equipment, curing room curing box drying box series, geotechnical testing equipment, mortar testing equipment, mud testing equipment, various test molds, waterproof membrane testing equipment, highway aggregate testing equipment, pavement testing equipment, highway rock testing equipment, non-destructive testing equipment and other instruments and equipment.

Our company also undertakes the planning and design of new laboratories, equipment selection, installation and commissioning, accessory supply, and logistical support. Cangzhou Zerui Testing Instrument Co., Ltd. is a company that produces and processes testing instruments and other products, with a complete and scientific quality management system. Cangzhou Zerui Testing Instrument Co., Ltd. has been recognized by the industry for its integrity, strength, and product quality. Welcome friends from all walks of life to visit, guide and negotiate business.

Our company offers a complete range of spot goods, reasonable and fair price advantages, proactive and enthusiastic service attitude, and skilled after-sales support to provide you with thoughtful service. We adhere to the business principles of fast delivery, contract compliance, equipment transportation, implementation of three guarantees, and tracking services, and are dedicated to serving our customers.